Too Much Spring On Tilt Up Garage Door

3 open the door fully to relieve the tension on the hinge springs at each.

Too much spring on tilt up garage door.

The full weight of a garage door can range from 150 to 800 lbs. Or more so you will require enough strong people to help you with this. Once your garage door is secured remove the spring hook from the track hanger which will allow you to move the hook and adjust the spring s tension. One end is a fixed attachment to the garage door track or wood frame.

You may wish to work on your garage door extension spring with your garage door up. To adjust your garage door s side mounted springs first open your door fully and secure it in place with a c clamp below the bottom roller. Disconnect the door from its motor by pulling the trolley s red cord and lift the door open. A properly fitted spring or springs will create a safe balanced garage door.

If you do so you need to clamp vice grips on the door. The solution to replacing a garage door spring is first identifying the problem. The other end is attached to a pulley through which the garage door cable is threaded. If you are underneath it it will come down on you like a guillotine.

If the door raises too quickly the tension is too tight and the automatic opener must work too hard to close the door. A spring that is too small or too large can damage your opener wear on your cables cause a safety hazard and more. Otherwise it will fall breaking all of your windows.